Search results

ok well the ingnitor is sitting about the intake manifold on the firewall and just wondering if it being so close to the motor and getting more of the engine heat im guessing but being mounted on the firewall close to the motor would that cause any issues ? any ideas on were to start looking...

so is that the turbo ignitor the big black box that has the two plugs going into it..... also ive been driving without issue for over a year now on this swap do ignitors just go out some times or is that outside the norm

no i put 15k miles on the motor with the new ecu im thinking it might be the fuel pump ive never replaced the fuel pump but the rpm needle starts to jump around right before it dies and im just assuming im loosing fuel to the motor since it idles perfect and it only happens after warming up but...

also when i swaped the motor i replaced the crank position sensor the o2 sensor pcv valve pretty much every sensor except the idle air control valve all the vacuum lines are new as well as the ecu

hey im having an issue with my 1jzgte motor after about 30k on the swap, one day i was driving it and i noticed the rpm needle was moving up and down on its own down from 0 up to 7k rpms yet my car was at its normal revs and not were the needle said it was ? then it just died idk what to do i...

i have my iridium plugs gaped to .025 and it runs smooth as silk so i put the coppers in without gap and went for a drive and i got spark break up at full throttle/boost so i gapped them down to .025 and ran them no more spark break up on boost but idle was jumpy and ran to rich for stock...

so i took the copper plugs out checked them they looked fine checked my coil packs no cracks checked the isvc its getting 12v to it checked my tps for carbon build up witch i had an issue with when i first installed the motor its clean and the sensor is brand new and its also getting 12v so i...

hey guys i just put new plugs in my 1jz the other day and now its running rich and and the idle is jumping up and down a by just a couple hundered rpms so it will go from 700rpm down to 500 rpm at idle. it has also died on my a couple times. i did not have this issue before when i had my set of...

i used to have break up in my 1jz at about 3500rpms and then i gaped it to 0.23 and now there is no issue you might just want to tighten that gap and see if it helps

if i were you i would get a classic yota like a 65 2000gt great car and i have never seen one in the states

cool im probably going to show up

they are toyo proxies t1r's and there on 20" rims so thats most of the cost im guessing also lets stay on topic in this thread show your blades or shut the fuck up

its not that i cant afford rims i got these for free and i was board also i have aftermarket wheels on my car now but fuck paying 350 to replace just one tire

well you never know tell you see them on the car maybe they will look good maybe they wont and if they look ugly ill just strip them down to metal and polish them up

well not slicks just he drifted on them all the way down to the steel belts you cant see it that well i have an old camera but im hoping these look good on my red mk3

well the tires are garbage they were drift slicks i think the guy i got them from put them on a 240sx and the color is copper like a Pennie so i don't know what sewer you have been hanging in but id start scraping the copper off the man whole make some money lol also just wanted a unique color...

when your garage turns into a mk3 grave yard lol

i just picked up a pair of stock saw's and they were ruff so i decided to paint them bronze 2 of the wheels i striped down to bare metal with a dremel tool the others i just sprayed to see what would happen i used a can of rust oiluem paint im about to put tires and mount them on my supra but...

for sure man i dont think ive seen another supra there and ive gone twice always a group of mr2's lol and alot of 50k doller muscle cars i think its time to rep the mk3's for sure

wish i could come this saturday but i have a funeral to go to but next weekend is im down and also there is another meet going on is called slammed fam car meet down by 8700se Sunnyside, Clackamas, OR 97015 olive garden in clackamas there looks to be alot of rsvp so maybe we could get a few...