Search results

code 42 pops up. and thats the only code. i dont have thows sensers in the front wheels but i belive thats for the abs thats why my abs light is on. and my speedometer gadge doesent work, one day started to make a chirping noise then the next start up it dident work, sounded right behind the...

hi u guys. well here is my commpression test numbers 1-178 2-180 3-180 4-180 5-179 6-175. i also changed the spark plugs to some ngk 4644

hmm just checkit it. so on the coil pack from left to right, left being the turbo side. 163425. is this right? EDIT: just noticed my plug modle number and ther ngk bcpr6egp

fireing order is correct. i did clean out some oil from when i spilled a bit of oil in ther. im check it out now.

o snaps i thought i posted a reply yesterday but i gess it dident go threw :( the exhaust is not toughing no more its all good. fan blades are all good. but still viberating when i had the engine out i did replace the clutch disk only so maybe could be my presser plate. i dont know if this...

ok ive found the timeing belt to be realy loose but not enough to skip a tooth so i tighten it. so i ran the car again with the power stearing belt off and fan and altinater and timing cover off all at once and the shivering is still ther. i notice that oil pump pully is a bit wabbaly and when...

k after i drive it a bit im going to start torqing some bolts to see if ther in spec and maybe going to have to re do my exhaust again.

all right u guys here is the video of what i perty much done to the car. hopine u guys know if any think i did causing this sorry for the quality i had to use a old camera and looks like youtube downgraded my vid quality. http://youtu.be/ruRZ0SeDGYU

well couldn't get a good camera instead i got some old school one but it should be fine. ill make the video tomorrow. ill just be describing a bunch of stuff that ive done to the car.

o forgot. the idle pulley is the previous one. it spines good and every thing. Didn't seem wobbly when i was inspecting it

thanks for ur reply. the vibration happens the whole time, in idle in all rpm range. it just seems it lighten up above 1500 but still vibrates. was thinking the power steering pump since it was making its usual noises when starting but i ran the car with the belt off to see and not the problem...

hi u guys its been a while since ive posted but a problem that came up that im having trouble trying to find and hoping i can get some good suggestions while i do some small stuff like injector testing coil inspection and spark wires and plugs inspection but doubt it cause they are fairly new...

ill test it with it pluged in when i get back home. will be home in about 3 days ill be replacing thows 2 wires maybe if can figer nothing else out and see whats up with the ground

update on the smog. bought pre cat and cat. trew out the msd wires and got ngk, found some ic leaks, put in diff afm. 15mph %co2 14.6 %o2 0.0 HC meas 17 co% 0.00 no 0 25mph %co2 14.6 %o2 0.0 HC meas 6 co% 0.00 no...

with the key on (tha) on the harness has 4.99v and e2 shows .02v.

just another question, about the afm, was looking at my repair manual and for 89 and up turbo modles to check only the tha-e2 the temp senser, and my supra is a 90 so was wondering if the rest of the afm even needs to be check such as (ks to e1) (e1 to ks) (vc to e1) (e1 to vc) the way 87 to 88...

ok, for sure.

hi. i get code 24 on both my lex and stock afm. i checked the connection from the ecu plug to the harness afm plug and ther fine. the air temp senser looks like its something seperate in the afm just hanging out with afm but when i test its ports on the afm it self, the air temp part works find...

sounds right. my battery was dead and had to be jumped. it was on 9 volts at once. and the bolt, thanks for clearing that up. this was realy good info for me. thanks. now ima have it fully chaged then try if not its time to upgrade battery, mine is realy old cheap battery and not even the right one

if i have code 24 - Intake air temperature, would that effect smog by alot? i get this code on both lex afm and the stock one.