Search results

Yes I did,thanks

Yep,still selling bushings.I have sent you a pm.

Hey tsuper92, I have 3 sets of steering bushes in stock. Thanks for good feedback,guys.

120.00u.s ---front subframe kit 140.00u.s----raer subframe kit Shipping from new zealand not included. Thanks, Ronnie

Thanks,ctsupra. How did the rear set installation go?.

Hi everyone, I thought I would show everyone photo of poly subframe kit. Thanks, Ronnie

I have suspension techiques lowering springs with tokikos 2.How much more drop in height does the RSR AND H&R give compared to the suspension techniques springs. Ronnie

Ok Guys, I make the poly sets for mk3 supra. I have been reading posts about poly bushings prices. No way I can make a full full kit for $150.00 it's is impossible. Prices for poly kits are high because I have to pay for raw materials,costs for buying mk3...

These bushings will fit 88 supra. Here is photo of poly front subframe bushing with stock inner steel sleeve.A new steel sleeve is also included with the poly bushings.

I will post photos of front subframe bushings. The poly bushings would be as noisy as Bic spacers. I go make softer grades of the subframe bushings if requested

I already have 89 ecu,so it should be a straight forward.I need to fix my intermittent problems before I get the maft pro.

Correct.90a shore hardness is just right for bushings

I will remove individual wires for my cps and throttle sensor off the 1989 harness to replace the wires in the 87 harness.That way, the connectors will be the same Ronnie

I could get my mate who works in the plastics industry to see if it would be easy to make these. I will send a photo to him tonight Ronnie

I have intermittent problems with throttle sensor and cps. IWhat is the white connector and the 3 pin connector beside the white connector for.I have noticed the wiring setup on the 87 harness different from 89 harness. Please see photo ,these are connectors that sit around the ECU area. Ronnie

$220.00us,shipping is usually $50.00u.s to US.A The 90A shore hardness(sorry not rockwell hardness) is hard as tap washer. There is shore D hardness which is harder.70D probably as hard as golf ball and even harder suff like 80D which is hard as bone. Ronnie

BTW the bushings are 90 rockwell hardness,I can go 1 step harder to 100 rockwell if anyone is interested. Ronnie.

I have also noticed that the inner diameter of the stock inner steel sleeves is 17mm,but the subframe bolts are 14mm diameter. Ronnie

guys, here is photo of full rear subframe bushings kit. Ronnie

Hey Guys, I have decided to do a 87 to 89 engine harness swap for a 7mgte ,Is there any differences in wiring apart of ecu connectors. Ronnie