LSF 90 Supra

trboflyr

New Member
Jan 6, 2007
13
8
3
Orange county, CA
I have a 1990 Supra that has been waiting for years for me to build. This is my 5th mk3 Supra I have owned throughout the years and I'm finally building what I have been dreaming about ever since I first drove one.
The plan is to have the car ready for Supras in Vegas in October.
The car started life as a na targa top with a automatic. I swapped a 2jzge I rebuilt for my 93 gs300. I'm guessing I only have about 20k miles on it. But I just swapped the head for a 2jzge vvti that's fully built from Brangers Performance. Stage 2.5 port work, GSC 1mm oversize valves, BC 272 vvti cams, supertech shim under buckets and shims. I'm using a Plazmaman dual injector race manifold with 12 1300cc injectors. Turbo is built by Brangers, it's a 71mm on a borgwarner s360. I have a 60mm electronic power gate wastegate.
I currently have a R154 fully built with all the Marlin Crawler goodies and a Clutch Masters FX1000. I also have a t56 magnum that needs a rebuild that will most likely be swapped later.
I have a shop and I'm a fabricator so I built my own tri-y header and just finished building a tubular rear subframe out of chromoly that fits a 8.8 irs diff which I do plan on offering it for production. I'm running Driveshaft Shop pro axles.
Been slowly working on this for years so I guess I'll do a photo dump of how it sits now and then continue on with the progress with pictures.
Plans are to have air to water intercooler, fuel cell, Fueltech ecu.
Going to use this car for Drag and drive events while showing off the fabrication we offer at the shop.
 

Attachments

  • 20190410_185450.jpg
    20190410_185450.jpg
    5.7 MB · Views: 10
  • 20190410_185315.jpg
    20190410_185315.jpg
    5.6 MB · Views: 8
  • 20220616_120005.jpg
    20220616_120005.jpg
    4.7 MB · Views: 8
  • 20220616_135240.jpg
    20220616_135240.jpg
    3.3 MB · Views: 10
  • 20220614_085657.jpg
    20220614_085657.jpg
    1.6 MB · Views: 9
  • 20220616_112040.jpg
    20220616_112040.jpg
    1.9 MB · Views: 11
  • 20220712_090523.jpg
    20220712_090523.jpg
    1.3 MB · Views: 10
  • 20220712_090604.jpg
    20220712_090604.jpg
    2.8 MB · Views: 9
  • 20220712_092027.jpg
    20220712_092027.jpg
    3.3 MB · Views: 9
  • 20220713_114441.jpg
    20220713_114441.jpg
    1.8 MB · Views: 10

trboflyr

New Member
Jan 6, 2007
13
8
3
Orange county, CA
Here's pictures of the tubular rear subframe with an 8.8 irs from a ford Explorer, it weighs 38lbs vs the stock at 66lbs.
 

Attachments

  • 20220722_143904.jpg
    20220722_143904.jpg
    4.6 MB · Views: 7
  • 20220722_144204.jpg
    20220722_144204.jpg
    2.7 MB · Views: 6
  • 20220722_151049.jpg
    20220722_151049.jpg
    1.5 MB · Views: 5
  • 20220722_143926.jpg
    20220722_143926.jpg
    4.1 MB · Views: 6
  • 20220722_143638.jpg
    20220722_143638.jpg
    5.5 MB · Views: 7
  • 20220722_143628.jpg
    20220722_143628.jpg
    5.3 MB · Views: 7

trboflyr

New Member
Jan 6, 2007
13
8
3
Orange county, CA
Here's some more pictures. I was able to install the rear subframe with the suspension today. I'm going to add another tube on the lower section behind the diff and use it for a jack point. I need to add mounts for the sway bar.
Test fit the street wheels and the drag wheels also. In the pictures you can see the frame for the fuel cell.
 

Attachments

  • 20220723_113806.jpg
    20220723_113806.jpg
    4.3 MB · Views: 9
  • 20220723_132130.jpg
    20220723_132130.jpg
    4 MB · Views: 8
  • 20220723_132305.jpg
    20220723_132305.jpg
    1.4 MB · Views: 9
  • 20220723_132142.jpg
    20220723_132142.jpg
    2.8 MB · Views: 8
  • 20220723_142717.jpg
    20220723_142717.jpg
    3.1 MB · Views: 8
  • 20220723_142847.jpg
    20220723_142847.jpg
    3.3 MB · Views: 9
  • 20220723_145419.jpg
    20220723_145419.jpg
    3.5 MB · Views: 9
  • 20220723_145402.jpg
    20220723_145402.jpg
    3.3 MB · Views: 10