Wolf installation

[QWIKSTRIKE]

Finally....I am getting that Wolf V ECU installed. Hopefully...I will have fun by the end of the week. I am contemplating a new project next year for sure. Now I have LS2 Corvette Coils, and a custom bracket made to mount this stuff. I have a idle speed control valve remote mounted with a ISC from a 96 Grand am.

 

[Doward]

:ttiwwp:

 

[IJ.]

Ant: Good luck

 

[iceberg319]

sweet, will i see a 12 sec pass this time around?

 

[QWIKSTRIKE]

Ant: Good luck

Time is a ticking IJ...thanks.

 

[lagged]

it sure is! you gotta make it to the meet saturday!

 

[QWIKSTRIKE]

The Wolf V500 is fianlly installed. I got my WOLF v500 EMS installed this weekend...what a difference the ECU makes. I have some things to get finalized then off to dyno. The last time I made 474RWHP and 449ft lbs of torque at 22 psi. I am getting a signal malfunction from the ABS sensor. I J can this be corrected?

 

[IJ.]

x posted from SF

You need to figure out exactly what sort of sensor is installed Ant

If it's a Hall it should talk to the Wolf directly but if it's the more common reluctor you'll need a module.