Wiring in the 2JZ auto-wires to MKIII

[Satan]

I am finishing up on my wire-mapping tonight (wiring up tomorrow) and have not seen anything too-comprehensive about making the wire connections for the 2JZ auto tranny. I am using what I know and think it's going to be fine, but if anyone's got some resource that could help, please let me know. I am using the 2JZ auto tranny with the APEXi Rev/Speed Meter (has outputs for speed and RPM, as well as takes care of speed cut).

Things I'll be figuring out/finishing tonight...
1. Shifter connections to ECU (gear indicators, O/D, etc)
2. Neutral start
3. Speed sensor output to ABS/other (using an APEXi Rev/Speed meter)

I have all the well-known stuff... Arnout's, Rick's, Ian's, and a few other diagrams/pinouts. I think I have all I need...(but I've thought that before :-(

I am just hoping I don't miss something and have to spend all day tomorrow troubleshooting something I should've planned for.

Thanx in advance!!

E

 

[LexusTech117]

How did it go? Did you get everything wired up right? Is it running yet?

-Dave

 

[Satan]

Well... we got it "almost" done. Basically using some of the 7M harness connectors and making an intermediate harness. I still need a 90+ B1 connector, but will make do without it if I need to.

We didn't get into the interior yet...by where the connections go to the 7M's ECT computer. That's really where I still have some tracing and mapping to do. Gonna try and finish mapping that out today and then get back to the shop during the week to start it up.