Wideband ?

[JStoked]

oK so i have done my reading. But no one can tell me where my inovated bung needs to go. Some say at the top of the elbow. And some say at least 16 inches down. So wtf where do i need to put it for the best results?

 

[mk3tattoos]

further The better, I think mines at 12" and never had a problem.

 

[CyFi6]

Read the instructions with your wideband and follow that. It will read accurate at the elbow or further down, but the sensor life is sacrificed if you put it too close to the turbo (too much heat).

 

[IJ.]

I ran mine in the horizontal section of pipe beside the trans.

 

[destrux]

Yep, that's where mine is too, about 6" before the trans crossmember. You can run the sensor wire up through the shifter hole rather than taking the long route too.

 

[Turbo Habanero]

I ran mine in the horizontal section of pipe beside the trans.

Also where mine is 12-14 inches away from the turbo should be good

 

[JStoked]

Ok thanks guys. That's where I'll put it.

 

[Green7mgte]

I always read that the farther away from the heat source and the proper angel are crucial.. what is it. 10 o-clock? or something along those lines?

 

[OneJArpus]

^10 - 2 only 9 & 3 may be used if 10 n 2 can not but nothing under that. Condensation will destroy the sensor, i put mine right after the OEM sensor. If it dies it dies, i'll just get another sensor and put it further down to test the length of time in miles.