when does your trubo come online

[NashMan]

ps not every one gonna have the same trubo so say at lest what you have

i hope to have my trubo full boost by 3000 rpm ish

 

[JustAnotherVictim]

I was hitting about 8psi at about 2500rpm on my stock ct.

 

[EdgeSupra]

My turbo doesnt get to use the internet :biglaugh: .

Hahahaha

I have stock CT26 and its comes on fast, like 3k.

-Justin

 

[starscream5000]

full stock boost for me is like 2.5kish

 

[jdub]

In both threads he made for this, he spelled turbo wrong twice.

There's a reason for that...don't give NashMan grief on his spelling...Ok!

I have an SP61...boost comes on hard at 2800-3000 rpm (depending on OAT)...full boost at 3500 rpm.

 

[rumptis]

I think I'm running about 12 psi on a stock turbo and its at full boost around 2800-3000. I'm hitting about 7-8 psi at 2500

 

[Neodeuccio]

I'm running a stock turbo system and it hits at about 2800, give or take. As far as when I hit full boost, I'm not sure. If my throttle is in all the way, I'm not looking at the gauges.

 

[mc_h]

i rather use a rolled up news paper just like a bad dog

and there is reson behind this thread


lag is bad new's

The 67 won't fully spool by 3k....Not a chance in hell man
I doubt the spray will increase spool by about 1k rpm

 

[Insidious Surmiser]

i spool 7 psi in no time (2,800) but it keeps spooling to fuel cut by 5,000-5,500... and no, i have no boost controller or shims :-/

stock ct 3" exhaust, 2" hard pipes

 

[xXxICExXx]

I'm about 2750 when I hit 8.5 psi

 

[dbsupra90]

67mm usually hits full boost around 4500 rpm, depending on your setup and turbo configuration. i have no idea how you are going to get it to hit full boost 1500 rpm sooner. aem w/ anti-lag and a whole lot of n20 will help, but even still im not sure.

 

[RHDMK3]

Mine come on when that little green light below my speedo lights up. I've never looked at the RPM's though. I would guess around 3k or anytime I really get on the pedal.