Ok so i was driving and noticed a very suttle squeal but didnt think anything of it.......now its even worse and its gotta be the bearings........anyone done them before?? If so how long did it take how much did they cost all the usual info thanks guys............
Wheel Bearings going out maybe??
- Thread starter bluedragon17
- Start date
You sure it's not just the indicators on the brake pads?
The wheel bearings have to be pressed in. Most shops will do it for a reasonable price if you bring in the knuckle already out of the car... otherwise it's pricey.
The wheel bearings have to be pressed in. Most shops will do it for a reasonable price if you bring in the knuckle already out of the car... otherwise it's pricey.
Fuzz420
Are U Here 2 take My Baby
From my experience with wheel bearings going bad the car makes a "roaring" sound while your driving. Its loud,noticible and quite annoying
While driving, if you turn the steering wheel slightly left or right and the noise goes away its the bearings. it is more of a roaring sound than a squeal.
I checked the brakes there cool for now no wear indicator or anything like that...........and its getting steadily worse.........it could be the bushings didnt see any wear signs or anything like that..........and the bearings are 85 dollars for future reference ill check the bushings tomorrow when i replace the brake pads and spark plugs and fog lights and lube the bearings. Thanks for all the input and help all........
thanks clip found a couple pigglets removed them no but greased the bearings and everything i could with a needle greaser and worked them by hand no more squeaks so far and i replaced the brakes and nothing stops on a dime though evrything else is done now too so hopefully it should be cool thanks for evreyones input even clip being a smart ass about it lol
JustAnotherVictim
Supramania Contributor
yeah i thought about that also i finally found my problem though apparently when you go slide your car on "accident" some things get messed up it was a bushing thanks yonkers87t for that everything is tightened down and that bushing has been replaced NO MORE SQUEAKS!!!!!! ::w00t::