VPC/GCC tuners ,,, please check in!!!

[4kinboost]

Hey guys,,, I'm looking to get a baseline for 11.5-11.9 a/f across the board before i jump on the dyno to save myself some time/$$...

I know that alot of you guys with expert tuning can help me get close here.

My car has a 60-1 upgrade, 3" exhaust,550's,vpc,gcc, yada,yada,yada and what i'm looking for here is to see where you guys have your knobs set on both vpc and gcc.... Also please include your base fuel pressure(vacum off) and where your timing is set.

I'm looking to dial this car in and run the car at englishtown to see how far down in the 12's i can get!!!


thanks for the help!!

 

[Bishop92t]

Tuning even with a baseline without EGT or wideband is suicide for your engine. If you've got either one you can establish your own baseline as it's not safe to use other peoples tuning settings. No two cars are alike, they won't tune the same and that can be troublesome if you don't tune for your exact car.

 

[4kinboost]

I don't think it would have hurt me to hear what other people's settings were and what base fuel pressure and timing was dialed in at,,,, it would have given me a decent guideline....

thanks for the advise though,,,