Twin Turbo oil Tube in the way of BIC pre 89 Motor mount brackets! HELP!

SupraMario

SupraMario

I think it was the google
Mar 30, 2005
3,467
6
38
39
The Farm
Ok, so yea I'm making an ass load of threads. So here it is. Can I bend it back and just get a longer hose? OR? I just would think that bending it back toward the transmission would not be a wise Idea! And bending it down would put it in the way of the exhaust brace...So I'm stuck >< Need help!

p1099474_1.jpg


p1099474_2.jpg


p1099474_3.jpg


So any suggestions?
 
SupraMario

SupraMario

I think it was the google
Mar 30, 2005
3,467
6
38
39
The Farm
LOL, well if you look there is 4 holes they are the mounting points for the motor mount brackets...If you look below them there is a tube, a black pipe, that is the oil tube for the turbos, it is in the way BIG time. Clear now? or still ????
 
SupraMario

SupraMario

I think it was the google
Mar 30, 2005
3,467
6
38
39
The Farm
IJ.;1099510 said:
Like I said I can't tell shit from the pics ;)

Oil supply or drain?
Click to expand...

I don't think they are supply..the TSRM just calls them the No.2 Turbo Oil Pipe. Nothing more nothing less...
 
SupraMario

SupraMario

I think it was the google
Mar 30, 2005
3,467
6
38
39
The Farm
IJ.;1099516 said:
If they're drains the main thing to keep in mind is they MUST go downhill at all times.

Have to PM'd Randy to see how he handles this?
Click to expand...

I did, I pmed, Jose, Randy and Aaron >< you just got to be the lucky winner of being online and in aussie land :biglaugh:

Water hoses...I'm fine with bending them, anything oil wise with the turbos...umm no.
 
Bigzavs

Bigzavs

86.5 1JZ Single Turbo
Apr 21, 2005
2,267
0
0
39
Arlington, TX
easy fix to this situation


go single

i had the same problem on my motor (chaser 1JZ), id just say get a propane torch, heat them, and bend them till they fit
 
SupraMario

SupraMario

I think it was the google
Mar 30, 2005
3,467
6
38
39
The Farm
Bigzavs;1099527 said:
easy fix to this situation


go single

i had the same problem on my motor (chaser 1JZ), id just say get a propane torch, heat them, and bend them till they fit
Click to expand...

Easy yes...Cheap no...and I want twin turbos for now.

Bending them is looking like my only solution...

IJ.;1099520 said:
LOL lucky lucky me
(so I was 4th choice.......)
Click to expand...

Actually you where #1 but don't tell the others that. :p
 
SupraMario

SupraMario

I think it was the google
Mar 30, 2005
3,467
6
38
39
The Farm
soapra;1099804 said:
The brackets fit. no need to bend anything. the lines come close to the brackets but it's not a big deal.
Click to expand...

Nope, the bracket will not mount on this unless I either bend it or push it down and mount it. That metal tube is right there.

foreverpsycotic;1099830 said:
Slip the bracket between the line and the block, it will rest on the top IIRC.
Click to expand...

So stick it under the oil tube then...hmm gonna try that.
 
NecroCyde

NecroCyde

Lurk R
Apr 5, 2005
221
0
0
40
Calgary/Brooks, Alberta Canada
i used bic mounts, just bend the mounting tab out of the way, the pipe will tuck up nice and snug next to the bracket itself. it will fit for certain so you dont need to have all the mounting points on the oil tube as the one in the first picture would be a bitch to undo in the car, that oil line isnt going anywhere so just fiddle with it until it goes on.
 
Last edited:
becauseican

becauseican

Supramania Contributor
Mar 31, 2005
1,451
0
0
Vancouver
www.bicperformance.com
What engine are you using?, is it going into a mk3 Supra?, front, rear, mid sump?. These brackets are for Supra 1jz engines with the mid sump oil pan, other 1jz have different oil pans and different turbo drain lines which wont fit with the brackets. If you have a differnt engine/ oil lines just bend the lines until they fit. If the brackets are genuine BIC brackets the bolt holes WILL line up, I have sold many, many, many sets of these brackets with no problems.


Some clear pics would help too ;)

Randy
 
SupraMario

SupraMario

I think it was the google
Mar 30, 2005
3,467
6
38
39
The Farm
becauseican;1100027 said:
What engine are you using?, is it going into a mk3 Supra?, front, rear, mid sump?. These brackets are for Supra 1jz engines with the mid sump oil pan, other 1jz have different oil pans and different turbo drain lines which wont fit with the brackets. If you have a differnt engine/ oil lines just bend the lines until they fit. If the brackets are genuine BIC brackets the bolt holes WILL line up, I have sold many, many, many sets of these brackets with no problems.


Some clear pics would help too ;)

Randy
Click to expand...

Doh, I'm stupid and automatically thought everyone would know. LOL
its a 2jzgte, yes, mid/rear sump. The bolts line up great, I was just worried that it would damage something, but all is good now. thanks for all the help guys.
 
I

IJ.

Grumpy Old Man
Mar 30, 2005
38,728
0
0
62
I come from a land down under
D34DC311;1099591 said:
naa old aussie men are my type.:biglaugh:
Click to expand...

LMAO that is just so wrong on so many levels dude :D
(I've noticed the Gay is strong with the Mk3 crowd there was LOTS of Gay joking at the dyno day yesterday)

Randy is the man to listen to on this one!
(always helps when you have direct access to the designer)
 
You must log in or register to reply here.
Top Bottom