I have a 7mgte with 660 injectors walboro 255 fuel pump and safc. The engine has been fully machined and had to be board .26 over also i sent the stock turbo to Majestic to be modified. A 60 trime was installed and given 30% more flow. I have a 3in down pipe and 3in exhaust. my question is " without access to a dino what would be a good base line to set on the safc and still be safe. Please help by sending the peramitors for each setting if at all possible. also we have an open drift day in Sioux Falls South Dakota at the end of the month with assoc. with US DRIFT.
Tunning safc w/Lexas maf
- Thread starter EZ ONE
- Start date
There aren't any universal base settings from what I've seen. Two cars with identical setups would require different settings. There are a lot of variables. You pretty much need a wideband O2 monitor to know for sure. Otherwise it's a gamble if you are pushing it.