Torquing Crank Pulley Bolt on an Auto

JDMMA70

Active Member
Dec 4, 2006
2,550
0
36
Houston
Need help with torquing the crank pulley on an Automatic supra. All searches lead me to how to do it on a 5spd. So that won't help me hah.

Thanks for reading
~JDMMA70
 

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
38
Fullerton,CA
you jam a screw driver in the ring gear for the starter or get a chain wrench and hold it inpalce. i like the chain wrench better and there like 25 bux at harbor frieght but dont get the one that you attach to a beaker bar its one link to short i think the actual one fits.
 

JDMMA70

Active Member
Dec 4, 2006
2,550
0
36
Houston
IJ.;1258322 said:
Screwdriver in the ring gear it is then :)
Thanks IJ, call me stupid but im looking at the TSRM at the Starter looking for the ring gear. Is it under a different name perhaps, im looking for it so I know where to jam the screw driver.


Thanks
~JDMMA70
 

IJ.

Grumpy Old Man
Mar 30, 2005
38,728
0
0
62
I come from a land down under
You'll need to remove the dust cover on the front of the bellhousing to get access from underneath.

Get a friend to use a BIG screwdriver against a tooth and the bottom of the block while you torque it down. (4th pic)

AT_045.gif