Topline engine gasket set

[Fozbo]

I was wondering if the topline engine gasket set from importperformanceparts.net is interchangable between the 7MGE and the 7MGTE. I ordered a 7MGTE engine gasket set and when it arrived, the sticker on the actual wrapped pieces says "7MGE". I went back and checked on the IPP.net site and they have the exact same part number for the 7MGE and the 7MGTE engine gasket sets.

I'm just a little unsure if it's just a case of the 7MGE being a base kit that also works on the 7MGTE, or if it is a wrong part.

Any help would be appreciated (tried calling both IPP and topline, but it's Saturday :/).

 

[mk3forme]

if its for the ge then I wouldnt think it would have the turbo to mani and turbo to elbow gaskets.

 

[themadhatter]

the gasket kit i got came listed as a ge it had everthing except the turbo gasket ,oil return gasket,and turbo elbow gasket

 

[EdgeSupra]

I used that gasket kit and didnt like it..my oil seals sucked and had to get ones from toyota, but it did come with the gaskets for the turbo elbow and manifold..next time im just gonna use toyota all the way.

 

[Fozbo]

Thanks guys.

I'm not worried about the turbo gasket stuff, going with full T4 setup.

I actually saw what looks to be a mani > turbo gasket, just thought there might have been some gasket on the NA that had that too.

Thanks for the clarifications.

 

[3.0T91]

I got the same gasket set. Word from the wise: use the black (engine) FIPG around everything, esp. coolant gaskets, and where the TSRM says to use it (oil pan, timing case, etc) and you should be fine.

 

[chriso]

Don't use the Throttle Body/Upper Intake Manifold gasket from the 7MGE set (the inside diameter hole is too small and restrictive). Otherwise you can interchange almost all of the gaskets there.