Tie rod ends

[Brewster]

I am going to be replacing mine and I was wondering if there was more to it than just taking the old ones off and putting the new ones on.

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?Section=SR&Page=77

 

[Superjustin13]

for tie rods.

make sure you put your tie rods back on exactly where your old ones were. count turns.

mark it with a paint marker.

or some type of mark, shit tape. w/e

 

[Nick M]

And then you get to go to the alignment shop. Tell them you installed them and now you want the car aligned.

 

[drivinginstyle]

And then you get to go to the alignment shop. Tell them you installed them and now you want the car aligned.

Then they tell you "You have a bent wheel, I can't align it"
Always has happened to me. AH!

 

[themadhatter]

always tell the alignment guy that you changed some shit around to he knows what to adjust lol some of those guys are so stuiped

 

[Jeff Lange]

always tell the alignment guy that you changed some shit around to he knows what to adjust lol some of those guys are so stuiped

They should always check and align everything, you shouldn't have to tell them squat. If you need to tell them something like that, I'd have someone else align my car.

 

[Brewster]

great, just got it aligned thursday. most expensive alignment EVER. seized camber bolts FTL.

thanks for the info guys.

 

[Nick M]

Then they tell you "You have a bent wheel, I can't align it"
Always has happened to me. AH!

Then don't drive on the sidewalk.

 

[JustAnotherVictim]

Then don't drive on the sidewalk.

:biglaugh:
Yea what Nick said is right.