Throttle body advise.

[VooDoo]

I have read all the threads for the q45 and seen the pro and cons of it. But what about the throttle body on eBay? I'm not one to usually buy things like this on there. But has anyone used or heard about them? They use stock bolt pattern and use pen tps and vac line locations, also come in various bores. The ffim I bought was made with the stock location plate for the throttle body is why I am asking.

 

[jdub]

Link to TB in question on eBay?

 

[92nsx]

I’m using the Q45 and it SUCKS!!! It is way too large for our small engine. Lets in way to much air at low throttle. It will be replaced with a TB around 70-75mm as soon as I replace my FFIM with a different/ good one.

 

[VooDoo]

I will have to do it when I get off work. iPhone don't really let me get the actual link. I have a ffim from sethron. 3" in/out treadstone ic. Good for 700 claim. I will have to decide what pipes to get that will work beast with the TB.

Thanks
I will get that info.

 

[figgie]

I’m using the Q45 and it SUCKS!!! It is way too large for our small engine. Lets in way to much air at low throttle. It will be replaced with a TB around 70-75mm as soon as I replace my FFIM with a different/ good one.

hooray!

For everyone else,

there is a reason why GM did not do a straight through design with their 90mm DBW. Low Throttle position control. Without it, the TP would act almost like an on/off switch at low TP.

 

[92nsx]

the TP would act almost like an on/off switch at low TP.

^^^ yep it really blows ass when trying to drive slow in a parking lot, or in traffic.

 

[VooDoo]

http://stores.shop.ebay.com/XO2RACING_THROTTLE-BODY_W0QQ_fsubZ108050017QQ_sidZ81441687QQ_trksid

They come in 90mm, 80mm, 70mm, & 65mm. Any recommendations on what size will give the best performance. Street/Strip wise.

 

[92nsx]

They come in 90mm, 80mm, 70mm, & 65mm. Any recommendations on what size will give the best performance. Street/Strip wise.

It will be replaced with a TB around 70-75mm