T4 or T3 flange on ebay manifold?

[LordLo]

Anyone know what type of flange is on this manifold? Looks like it might be a t4 because the flange looks slightly square. Not sure though, but thinking i might get one like it because the manifold is mandrel bent, rather then bends that are welded together.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150079557401

 

[Supraboostin]

pretty sure is a t4

 

[madsupra88]

Its T4

 

[LordLo]

So I'm assuming a t3 will not bolt onto that manifold?

 

[bigaaron]

It will bolt on, but only 2 bolt holes will line up :biglaugh:

 

[Facime]

you will need an adapter.

 

[Evilempire1.3JZ-GTE]

Go T4!
Room for upgrade also they make good turbos even smaller ones in T4.
Also split pulse is the way to go better efficiency and spool from exhaust flow.

 

[starscream5000]

It says it's for a 7M, but to me it looks like a manifold for a 1J....

 

[supradan22]

You just need a t3 to t4 adapter which they also sell on ebay for arround 30 bucks If I remeber correctly.

 

[bigaaron]

You just need a t3 to t4 adapter which they also sell on ebay for arround 30 bucks If I remeber correctly.

That adaptor is pertty tall, the turbo might sit too high up.

 

[LordLo]

It says it's for a 7M, but to me it looks like a manifold for a 1J....

Shoot... your right it is a 1jz manifold. I just ordered one too. :nono:

7m manifold doesn't have the space in the middle. :icon_conf

 

[Mr.PFloyd]

Shoot... your right it is a 1jz manifold. I just ordered one too. :nono:

7m manifold doesn't have the space in the middle. :icon_conf

well either they will send you a) a 7m manifold, or b) you can get ur money back easily at no cost to you because of the false advertising.

 

[Evilempire1.3JZ-GTE]

yep or get a 1JZ lol

 

[hottscennessey]

It's a 2JZGE manifold. If you want a manifold thats cheap, fits perfectly, sounds great, and will last.. check out my auction.

http://cgi.ebay.com/ebaymotors/ws/e...RK:MESE:IT&viewitem=&item=220080112980&rd=1,1

 

[MDCmotorsports]

Hottscennessey's manifold is one that I personally have reworked.

What happend to the riser?

(You should have just sent that t4 back to me and had me stuff the GT35R compressor wheel in it for your 2j project)

 

[Facime]

Its none of the above.

Looking closely at it I have no idea what motor that would fit.

It has the 3-4 cylinder gap, but its not 1JZ or 2JZ. The JZ's have 12 bolt holes, one on each side of the exhaust port, diagonally from each other. not to mention the ports are oval not round.

but it doesnt conform to the 7m either as it looks to have the cylinder gap and 8 holes (the two center ones are on the same side) instead of 7 (that should all alternate top and bottom)

So, I ordered one to find out what the hell is up with it. If it really is a 7M manifold and has the angled t4 flange it may be the answer to all the problems associated with the SSac manifold.





Or it just may be a piece of junk...I will soon find out, its supposed to be here next wednesday.

 

[MDCmotorsports]

Weezl: How much you wana bet they send you a 1g manifold?

 

[Facime]

ohh wow, ya think? Ive never looked at a 1G mani! I'll check that out. Hey if they send me a 1g manifold its going back at their expense and paypal is gonna hear from me...lol

 

[hottscennessey]

Hottscennessey's manifold is one that I personally have reworked.

What happend to the riser?

(You should have just sent that t4 back to me and had me stuff the GT35R compressor wheel in it for your 2j project)

I actullay sold the riser to another member on the forums.. and it is now for sale in the F/S section. It's floating around the community heh. I considered sticking another wheel on the T4, but then I was really curious about the MP turbos, we'll see how that works out. lol.

 

[Facime]

Nope not a 1GGTE either. They have 3 pairs of exhaust ports with space in between.

Tracking shows it arriving Weds. Will update then.