Okay so i stripped the threads on the inlet for the top line (the bigger one) and I haven't had my car for two weeks because I was waiting for the Fluidampr crank pulley I ordered. so... can I replace that part of the hydrofan quickly? otherwise I'm going electric. I've heard the hydrofans are good but mine did not work right anyway and I just want to have my car back. Input on what I should do anybody?
Stripped threads on hydrofan
- Thread starter 87Superdupra
- Start date
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
I have one laying around I could probably sell for 10 bucks plus shipping. I went with a 2jz setup as I cant even fit a flex fan in my conversion.
I pulled the fittings off of the back of the hydro motor on the back of the fan and I am just going to try and helicoil it. hope it works becuase all I need is thay one little piece and I don't want to spend an unessesary 200 for a whole hydro fan setup when I only need that one little piece.
Last edited:
I am not familiar with how to tap it out and than put the helicoil in. can I get this stuff @ the hardware store?
okay helicoild the fitting on the hydraulic fan but now I need a new gasket for the banjo bolt. I really hope they will have that shit at kragen. My girlfriend just broke up with me and I got a date tonight with a hot ass asian chick and I want to show her my sick ass asian car. you think they will have something that will work?