Stock BOV plumbing question....

DrDucttape

New Member
Jul 4, 2010
108
0
0
Fort Worth, TX
On the Throttlebody side, where the metal tube comes across the cam covers, where does the tube coming from the BOV connect? Vac diagram just shows it as open for some reason...

Any help is very appreciated!

Thx!

T-
 

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
0
Fullerton,CA
3000 pipe.
The vacuum line runs back to the manifold to the metal pipes near the front of the manifold.
 

jake8790

Life's too short for N/A
Dec 18, 2011
395
0
0
Oregon
There is another vacuum line that runs from the 3000 pipe down to the vacuum hardlines underneath the intake manifold.
 

DrDucttape

New Member
Jul 4, 2010
108
0
0
Fort Worth, TX
Yes, found it dead center of the bottom side of the intake manifold. Seems a strange place to route the line since the source on the manifold is only 6 inches or so away from the 3000 pipe. Must be some reason for it that I'm not seeing.

Thanks again! That was the last connection, *should* run ok now... I'll find out once the battery is charged up.

T-