Single or Twin

[darrick]

Hey folks, by the end of this winter I want have my car at 500 rwhp. I want to go single so I could boost more. Right now I have the 1jz gte swap, with and hks bov and intake. Should I build the car pistons cams and bore it out, or get a single turbo? Just checkin to see what the folks of sm have to say about it. Thanks.

 

[suprahero]

On a healthy 1jz, you can make 500rwhp, but it's not going to be on pump gas in my opinion unless you're willing to run more boost than I am on pump. On my 1jz, I made 443rwhp @ 18psi with a gt35r, cams, 624 sard injectors, and a Stinger standalone.

You really should do lots and lots of reading on this subject before you start dumping money into a project. Good luck.

 

[NewGen]

On a healthy 1jz, you can make 500rwhp, but it's not going to be on pump gas in my opinion unless you're willing to run more boost than I am on pump. On my 1jz, I made 443rwhp @ 18psi with a gt35r, cams, 624 sard injectors, and a Stinger standalone.

You really should do lots and lots of reading on this subject before you start dumping money into a project. Good luck.

I agree. If you need any help darrick lemme know. I kinda went through the same progress with my car.

 

[nick88]

I say up the boost and get a safc and keep it like that until the twins whine. Then go single.