show me your afm-less intakes

[zigspeed10]

I will be installing a maft-pro using speed density and haven't decided what to replace my afm with. I don't know if I want to keep the rubber accordian hose or try to find something that already has ports for pcv, isc, etc. I'm also considering making this a cold air intake. I'm running a stock manifold with a ct26. Show me what you got.

Thanks

 

[Fletch124]

You could get an exhaust shop to make you one with all the ports for the ISC and PCV system then just sent it to a chromer or paint it.

 

[sneakypete]

i just bought an aluminum 4" diameter pipe with 45 degree bend and cut off a little on each side. worked great.... i just had to pop a hole for the crankcase vent and ps idle up line... wasnt too bad once i found the parts.... ill post pics when i get home
-pete

 

[harry89supra]

Hey Pete can you post a picture of your intake pipe, i was just at the parts store. I was goign to buy a 45degree pipe like you used but i didnt think it would work, can you post a pict?

 

[sneakypete]

yea ill do it when i get home. when you first look at, it doesnt seem like it would work. so i cut a few inches off one side so the bend cleared the water neck. then i cut a few inches off the air filter side so it would fit in the bay. where are your ic pipes routed?