this is my 3rd supra, my last one was a turbo and i rebuilt the head twice and replaced the turbo once but ended up blowing a rod thru the oil pan and sending a piece of the piston head thru the side of the block.....anyway onto my question, this new supra i picked up is a N/A the guy redid the entire engine with new rods, new pistons(not sure what brand he used but they are alittle beefier will have that info later), bored it (.40), used a HKS 1.2 MHG, and raised the compression 10:3, and has a Apexi S-AFC II, and put on pacesetter headers and a HKS sport exhuast, and a clutch master stage 1 clutch. can i either lower the compression and turbo charge the 7M-GE and start with this engine, or should i find a 7M-GTE and build that up then swap them. this new engine has 16K on it and he has the old 7M-GE engine he removed from the car that hes given me. He was a toyota technition for like 4 years so its all done by the book.