sard 650cc injectors or manic tech rail upgrade

[klaasjoe]

Hey just wondering if anybody has bought the sard 650cc injectors. I was thinking of getting them from rhdjapan.com or should i go with this set up
http://www.manictechracing.com/mtr1jfuraand.html
I havent heard anything about them but it looks good. any thoughts would be great

 

[klaasjoe]

anybody?

 

[jz*supra]

I bought that MTR fuel kit. Injectors flowed 650-620 CC not 680. If that aint an issue then i would say it is great. I have no experience with sard injectors so i cant help you out with them.

 

[nguyen95465]

im running sard 650's

seems to be running fine on stock rail. not leaning out and allowed me to run a couple psi's more then i could with the 440's. also running with a aeromotive fpr

drop in and readjust with powerfc is all i had to do. i had to bump up the fuel pressure a bit to fix my idle prob but other then that all is well so far.

 

[klaasjoe]

hey did the sards come with the plugs as well?

 

[nguyen95465]

yea but i didn't use them.

 

[jza71]

My 800cc Sard injectors in my stock fue rail did pretty well for my car.

 

[nguyen95465]

My 800cc Sard injectors in my stock fue rail did pretty well for my car.

did you modify the rail at all? make it dual feed?


I thought i was pushing the stock rail with 650's

 

[annoyingrob]

My 800cc Sard injectors in my stock fue rail did pretty well for my car.

I like mine too




Stock rail, single feed. All you need is a good pump (or two) that can actually flow at pressure (AKA, not a crappy walbro).

 

[Mario San Miguel]

where do i buy sards i cant seem to find them

 

[hvyman]

Check rhdjapan.com.