I have an Innovate LM-1 WB.
It has an analog output for an A/F gauge. (0-5v)
So: a 14.7AFR translates to a 1.47v reading on the gauge.
I'm going to pick up a 8-18v (volt meter)
To get the volt meter gauge to read through the range of 0-5v, I need to swap out a resistor.
Can you help me pick out a resistor I would need?
They're rated in like resistance (Ohms) and Watts.
Just need a little help, thanks!
-Brent
It has an analog output for an A/F gauge. (0-5v)
So: a 14.7AFR translates to a 1.47v reading on the gauge.
I'm going to pick up a 8-18v (volt meter)
To get the volt meter gauge to read through the range of 0-5v, I need to swap out a resistor.
Can you help me pick out a resistor I would need?
They're rated in like resistance (Ohms) and Watts.
Just need a little help, thanks!
-Brent
Last edited: