Oh crap! What happened?

[supraman7mgte]

Alright,so I was adjusting the tension on my alternator,and put a wrench on the back bolt,and proceeded to tighten.The wrench goes over and shorts on the terminal of the alt,and sparks!!!! I get it off in time,but now I have no ACC power on my ignition!I can put the key in,turn to ACC,and no stereo,no power windows,wipers etc.But if I switch to the next position before START,I have power. WTF did I do?? HELP!
I've checked all the removable fuses in the engine compartment box,all the comfortable located ones in the drivers kick panel,and they all looked good!
Is there a particular fuse or link just for ACC power?:1zhelp:

 

[Yellow 13]

Theres another fuse box on the passenger side.

 

[macsupra76]

I had the sparky action before, but never blow any fuses, make sure to double check all fusses, sometimes they look good, but are actually f@#ked!

 

[supraman7mgte]

Would a code show up,or be erased when I removed fuses?
Would it show up again if I turned the ign to "on" after dooshing all the previous info?
I can't start my car due to awaiting a new fan from Jay Marks.

 

[Yellow 13]

My advice is to take the battery off first before you pull thing sor the ECU may get all funky. Pulling the battery for awhile will reset the ECU too Ibelive.

 

[Stretch]

You should be able to start the car regardless of a fan being on it anwyay, I'm not saying you need to just saying it'll run without a fan :icon_razz
eric

 

[Squid699]

check your fusible links in the fuse box in the engine bay...probably blew one of them.

 

[supraman7mgte]

found out it was the 100 amp fuse in the engine bay fuse block. Dealer had 1 left!!!

 

[Squid699]

yeah i figured. happened to me while I was driving once.......not fun.

 

[supraman7mgte]

yeah,had to disassemble the whol block just to get it our,strange the others were'nt bolted in

 

[Squid699]

yeah that's the one they don't want coming out unless you really mean it. lol.