No Check Engine light fixed. Now Code 52.

SrBigbutt

New Member
Apr 26, 2009
340
0
0
45
Spring, TX
Finally got around to fixing my check engine light. Previous Owners fix for CEL on was to take the bulb out!! WTF!!! Sure enough as soon as I took it for a drive the CEL turns on and its a Code 52. Which i'm not suprised because the Knock Sensor was unplugged when I got the car. I'm guessing its my wiring. Needless to say I will be reading up on rewiring the KS.
 

isnms

United States of America
Mar 30, 2005
2,145
0
36
Oklahoma
i80.photobucket.com
If your KS was unplugged when you got it and you have just now been able to check it; try clearing the codes, now that you have the ks plugged in, and see if it comes back.

To Clear codes - Pull EFI fuse for 30 seconds.
 

SrBigbutt

New Member
Apr 26, 2009
340
0
0
45
Spring, TX
Good point! I'll try that, but i'm sure i've pulled the fuse for something else after I plugged the KS wire back on. I'm sure its my crappy wiring. I've already broken like 4 plugs since i've gotten the car.
 

SrBigbutt

New Member
Apr 26, 2009
340
0
0
45
Spring, TX
Tried resetting the ECU and still got CEL. I then made sure that the plugs were not loose and the rear one was. So I pushed it in and got it to snap on, but still got code after resetting ecu.

So i'm being lazy and i'm ordering a rewire kit from Shaeff. Wish me luck!
 

PlatinumTracks

New Member
Dec 8, 2008
90
0
0
CA
SrBigbutt;1407695 said:
Tried resetting the ECU and still got CEL. I then made sure that the plugs were not loose and the rear one was. So I pushed it in and got it to snap on, but still got code after resetting ecu.

So i'm being lazy and i'm ordering a rewire kit from Shaeff. Wish me luck!

Hey i got the same problem as you code 52 and was wondering if you could take a pic or point me to some where so i know wtf the knock sensor is be4 i mess more things up:1zhelp:
 

dbsupra90

toonar
Apr 1, 2005
2,374
0
0
indiucky
PlatinumTracks;1408047 said:
Hey i got the same problem as you code 52 and was wondering if you could take a pic or point me to some where so i know wtf the knock sensor is be4 i mess more things up:1zhelp:

MEL274D.gif
 

SrBigbutt

New Member
Apr 26, 2009
340
0
0
45
Spring, TX
Got my KS kit from Shaef and installed it today. I got to say its definately a nice product. I definately recommend his kits. I could have made one myself, but this made the install a lot easier.

So no more Code 52!!! Took it for a test drive and it definately seems to be running a little better. This is the first time I drive the car without the code. So I never knew what normal was. I always felt like I wasn't getting full boost. Now I know why. Feels better and just makes me want to free up that exhaust now! lol!!

Hopefully now I can improve on that 16mpg!