no acceleration and low idle code 41 and 51

[chrisisg77]

So i took out my tps to clean/paint my old tb and now i get a reading of infinity no matter what position the tps is at . I Get codes 41 and 51 . I get low idle and sometimes it lets me accelerate good but does it slow sometimes it accelerates only like 500 rpms more pressing the gas all the way down and sometimes it doesnt accelerate at all . It idles at 500 rpm .i wont touch anymore sensors after this .

 

[mk3sons]

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=101

Read that a couple times

 

[chrisisg77]

It idles fine now but i get code 52 . ? At first when i adjusted it it would start off like if i had the bad tps but then i took the battery cables off and now it idles at 700 or 800 idk but then i let it sit i guess warm up and it goes to 1000 rpms is this right. Can i drive my car like this with code 52?

 

[chrisisg77]

Nevermind 52 is knock sensor it retards the car i read and experienced it i cant go past 2k rpms :c