New supra and the project begins!

mrs.ttsupra

New Member
Jul 25, 2010
4
0
0
Colorado
Hello all. Thanks to 87ttsupra and his "87 mkiii 2j killer" build, I've fallen in love with these cars and most recently acquired my first: an 89 n/a 5sp targa top. Has upgraded clutch and flywheel, as well as headers. Engine in good condition, I'm very happy :)

p1597570_1.jpg


The project now... the motor has not been in the car due to the fact that the previous owner (who had the engine for 16 yrs) was driving interstate speeds when the crank pulley fell off, resulting in some damage to the end of the crank. Not too much, but just enough that it needs replaced. Here's a pic of the damage:

p1597570_2.jpg


The progress so far... the trans and bottom end is off and just about to pull out the crank. Decided to take off the a/c and egr system while we had the engine out. I will have some pics of the car itself asap, as well as updates on future plans.
 
Last edited:

mrs.ttsupra

New Member
Jul 25, 2010
4
0
0
Colorado
UPDATE!

wow it's only been almost a year...

finally aquired money needed and developed plan. had a spare crank got that resurfaced and ready to go. needs a few more things (bearings, flywheel bolts, distributor cap, some exhaust work etc) about 450 bucks worth total and then it'll be ready to go!

a few small problems though; 6th spark plug just spins. not sure if it's broken or stripped so going to be taking head off to take a look around, as well as replace headgasket to save some time. any suggestions on methods to remove and repair head if stripped (heli-coil, insert etc)?? thanks!