Well the ol 86 na started farting on me again this morning.. Long time since its done this to me. Heater doesnt work.. bleed the system. Checked the fuses. All of that is good to go. When I change the temp on the heater control it doesnt switch from hot to cold. Yes I've had that part of the dash out here lately. But the connection is still good and tight, electrical that is. Checked for flow in the heater core. Its fine. No leaks and water flowing like a river. Is there a seperate fuse to control the motor that switches it from hot to cold air? If so is it located in the same panel as the heater fuse (passenger side kick panel)? Its not cold here.. but I just dont like when things start going wrong. It drives me nuts.
New one on me. heating
- Thread starter Oper8or
- Start date
is your hot/cold sensor behind the passenger dash working/ connected? i know mine was doing the same thing until i connected it.Oper8or said:
hmm, probably the Heater/hot water control valve (sorry, i'm not sure what it's called) but i hear that it is common for them to die, that's likely the culprit...
http://www.ma70.com/bishop92t/techtips/7mlayout.jpg
It the thing in that picture that is labeled "heater core vsv" it is back against the firewall on the passenger side...
http://www.ma70.com/bishop92t/techtips/7mlayout.jpg
It the thing in that picture that is labeled "heater core vsv" it is back against the firewall on the passenger side...
