NA/T Question (Electronics)

[Fuzz420]

Im ready to purchase full turbo electronics. I would like to make sure that my list of stuff looks correct and if you guys see anything else similarly related that i have left off the list that would be benificial to me when adding the turbo electronics please tell me.

Ok here the list of stuff that i have requested and will be purchasing:
1989+ GTE 5spd ECU
· 1989+ GTE 5spd Wiring Harness
· GTE CPS (cam position sensor)
· GTE Coil Pack
· GTE Igniter
· GTE AFM
· CT-26 O2 Housing/elbow
· GTE O2 sensor
· GTE Fuel Pressure Relay
· GTE Boost pressure sensor
· (6) GTE 440cc injectors (1989 7M-GE fuel rail)(includes rail)
· Oil filter housing

Thats all the stuff im getting, if there anything that could help me out that i have forgot to mention or more frankly i dont know about feel free to lmk

 

[foreverpsycotic]

get a turbo tach or a gauge cluster from a turbo.

 

[CRE]

^^^ Yup, get a GTE tach or mod yours.

· GTE Fuel Pressure Relay??? I was under the impression they used the same FP relay as the N/A.... Do you mean FPR (Fuel Pressure Regulator)?

 

[Fuzz420]

^^^ Yup, get a GTE tach or mod yours.

· GTE Fuel Pressure Relay??? I was under the impression they used the same FP relay as the N/A.... Do you mean FPR (Fuel Pressure Regulator)?

lol, im sure its suppposed to be regulator, i copied and pasted the list from the na-t faq thread and overlooked that.

Now as for the tach, i remember reading sometime ago(ill have to search again) that a resistor could be used to make the n/a tach functional. If this is correct i believe that is the route i will take.

 

[CRE]

lol, im sure its suppposed to be regulator, i copied and pasted the list from the na-t faq thread and overlooked that.

Now as for the tach, i remember reading sometime ago(ill have to search again) that a resistor could be used to make the n/a tach functional. If this is correct i believe that is the route i will take.

Yup there are one or two resistors to swap out.

 

[viper92086]

whats the boost pressure sensor? is it needed if i'm using a aftermarket boost gauge? i'm doing na-t also

 

[s383mmber1]

Spark Plug wires

 

[BorHor]

whats the boost pressure sensor? is it needed if i'm using a aftermarket boost gauge? i'm doing na-t also

Sender is only for the stock unit.

 

[shaeff]

whats the boost pressure sensor? is it needed if i'm using a aftermarket boost gauge? i'm doing na-t also

it's only for the stock, slow-to-react boost gauge. with an aftermarket gauge, you don't need it. replace the stock boost gauge (if you're already turbo, or using a turbo cluster) with an N/A's voltmeter.

-shaeff