Okay I have to build a header for my project. My first attempt :3d_frown: So what ideas do you guys have? Burns flat said a 6 into 1 is a bad idea...
N/A Header Ideas
- Thread starter DEFIANT 7M
- Start date
Life is much simplier today, than in the '50s. In the '50s, there were lots of 6 cyl motors. Just think of it this way....its already been tried and done...every mod you can think of for a 6 cyl.
So... the header designs being used are the ones that work.:biglaugh:
So... the header designs being used are the ones that work.:biglaugh:
^ what he said. Although, I would try to move the O2 sensor from where it is on pacesetter and obx like what 935 does w/ the ones that they sell. Other than that I can't think of any thing else.
Your both right...problem is nobody makes a header with primary pipes large enough for my set up. I did have my heart set on the 6 into 1 but the classic 3-2-1 is were it's at.
You could always buy an SSAC 321ss turbo header and do what you wish with that, Allan...
They're lower now, about $159+ship IIRC
They're lower now, about $159+ship IIRC
group a supra
SPAWNING AN INTERCEPTOR
DEFIANT 7M said:
i have 304 ss header flanges made here sir let me know i will get one cut for you n thethickness you desire
group a supra
SPAWNING AN INTERCEPTOR
You 100% sure on that Steve?
Mine didn't machine like MS but I didn't double check it!
(it was more like 304)
Mine didn't machine like MS but I didn't double check it!
(it was more like 304)
How about this one? Of course its a 2J header but I think it can be modified to work.http://www.superstreetonline.com/plugged/parts/130_0403_alphawerks_is300_header/photo_01.html
or these
http://my.is/forums/showpost.php?p=4301831&postcount=144
or these
http://my.is/forums/showpost.php?p=4301831&postcount=144
Last edited: