just came back from the dyno day. We had a very good turn out, 15 people ran. I was very surprised with my results. I ran a max hp of 271 and max torque of 280 at 12 psi. I thought i would only get arround 240.
my dyno results
- Thread starter 88YotaTurbo
- Start date
My mods are as follows: 3"downpipe, 3" test pipe, 3" RS-R exmag II catback exhaust, Modified Turbo (stock ct-26 malfunctioning wastegate opens at 12 psi) 
, HKS SSQV BOV, and a ACT 2100 clutch with street disc. i was running on 92 octane pump gas with 12 psi and 120,000 miles.
, HKS SSQV BOV, and a ACT 2100 clutch with street disc. i was running on 92 octane pump gas with 12 psi and 120,000 miles.
I think the biggest shocker for everyone is that I only spent a total of $1600 on the car and modification total.
No SAE, is a calculation used to make the dyno results independent of the effects temperature, barometric pressure, humidity, and altitude have on the hp reading. So it is still whp
nah it's not shimmed. I have looked for that. before the dyno day it wasn't working at all ( not openning). So i tried to fix it and guess i did. I'm guessing it was clogged up or something but I was yanking on the arm and i guess it fixed that.
I have some footage of my pulls. this way you can hear my sweet exhaust and bov.
http://www.youtube.com/watch?v=3eufruPEEnw
I have some footage of my pulls. this way you can hear my sweet exhaust and bov.
http://www.youtube.com/watch?v=3eufruPEEnw