MSD Digital 6 ona a 1jz???

[becauseican]

Just wondering if anyone has used one of these MSD Digital 6 on the 1jz?. It has multiple spark below 3300 rpms, and caps dischrage like the HKS twin power. It also has launch control and rev limiter. I am having some spark blowout at 17+ psi and hope that this would cure that, along with launch control which could be very bennificial. I think it would need to be run as waste spark, as a 3 cylinder with each output split into two. Whatcha think?

Randy

 

[Van Diesel]

I believe that to use the MSD6A on the 1JZ properly, you would need to have 3 in total.

 

[tissimo]

philip long 2 step and a dli..

 

[becauseican]

I am not talking about the old skool MSD 6a box, I mean the Digital 6 (DIS-6), box.......I just need to know if it will work on the 1jz ignition system.

Found here: http://www.msdignition.com/ignition_18_6520.htm

 

[Boostage]

Bump Because I wanna know too

 

[becauseican]

I did some more research and the MSD Digital 6 will not work, the MSD DIS-4 will work with a tach adapter. THe DIS 4 is made for distributerless ignitions. If I dont go with a microtech standalone, I will get the DIS-4 for next season.

 

[86_sports_1jz]

interesting, good info to remember, thanks

 

[Ric]

hks = plug and play