So the gentleman I bought this harness from is full of shit. The plugs for m1 and b1 in my car to harness are wrong. I need a pinout diagram that will help me get these wires matched up so I can start my car. This is the only thing holding me back and after an hour of searching I'm coming up empty handed. Some help would be greatly appreciated
More wiring problems......
- Thread starter mikehall05
- Start date
The TEWD has the answer to every wiring problem or question you could ever have.
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/
TEWD shows the numbers of the pins but it doesnt give me the info about each wire. the m1 on my car has two large center pins and the harness m1 has 3 large center pins. i need to see what wires are what so I can get the car going.
Huh? It shows exactly what the wires do. Btw is it true that Reno is so close to hell you can see sparks?
Last edited:
M1 has nothing to do with starting the car. The key wires for starting and running are the middle wires on b1. M1 only has signal wires for the dash. The ewd shows all of this.
ok well i have a DIY clip that i picked up at a local electrical store so i can get that clip together. but ill still need an actual break down of the wires for B1
all i could find in TEWD is the numbering for the wires. i couldnt find a diagram that listed colors/what they go to. if someone happens to know where that is in TEWD please share
and yes......reno is definitely close enough to hell. lol
and yes......reno is definitely close enough to hell. lol
The TEWD is organized by system, not connectors. M1 and B1 are part of the TCCS system, so look there for the info you seek. E.g.
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=49
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=49