I Been meaning to post my build for a long time just have not had time to.
Just want to thank everyone on the forum for all the helpful info.
Little info on the car...
I bought it from a lady up in Jacksonville FL a year ago. Picked it up for 500 bucks 85K miles on it. As usually it had a BHG and she let it sit for 3 years full of water. Long story short the motor was a boat anchor. Pulled it out and purchased a JDM motor to rebuild found for 400$ with everything.
Since I got the car I have painted the car which I wish I had before after pics of the car but I don’t. I have pics of the motor that came out and the start of the motor I building now.
Engine being rebuilt with:
ACL bearings
ARP all the way around.
NPR pistons.
Cometic 2.0mm HG
Engine has been fully worked at Machine Shop all the good stuff for a rebuild.
Oil pump is new with special coating on the impellers and housing.
Parts on the shelf waiting to go on:
Bic 3in DP
MSD wire
LEX/AFM
550 RC injectors
2.5 IC piping and intercooler
Stage 3 clutch F1
aero , FPR
walbro 255
AEM wideband
10 row oil cooler - oil filter relocator.
ARC BOV recert.
CT26 - 57trim
HKS cat back 3 in
Flex a Lite Fan Got them with 2 front seats for 80$ what a deal.
Here’s some photos of my car and engine. I mixed a batch of house of color paint I had laying around for the block came out real nice. Hard to see the color fade in photos but you get the gest of it.
More to come in the coming weeks.
Just want to thank everyone on the forum for all the helpful info.
Little info on the car...
I bought it from a lady up in Jacksonville FL a year ago. Picked it up for 500 bucks 85K miles on it. As usually it had a BHG and she let it sit for 3 years full of water. Long story short the motor was a boat anchor. Pulled it out and purchased a JDM motor to rebuild found for 400$ with everything.
Since I got the car I have painted the car which I wish I had before after pics of the car but I don’t. I have pics of the motor that came out and the start of the motor I building now.
Engine being rebuilt with:
ACL bearings
ARP all the way around.
NPR pistons.
Cometic 2.0mm HG
Engine has been fully worked at Machine Shop all the good stuff for a rebuild.
Oil pump is new with special coating on the impellers and housing.
Parts on the shelf waiting to go on:
Bic 3in DP
MSD wire
LEX/AFM
550 RC injectors
2.5 IC piping and intercooler
Stage 3 clutch F1
aero , FPR
walbro 255
AEM wideband
10 row oil cooler - oil filter relocator.
ARC BOV recert.
CT26 - 57trim
HKS cat back 3 in
Flex a Lite Fan Got them with 2 front seats for 80$ what a deal.
Here’s some photos of my car and engine. I mixed a batch of house of color paint I had laying around for the block came out real nice. Hard to see the color fade in photos but you get the gest of it.
More to come in the coming weeks.
Last edited: