MHG rivits need to be removed?

[loki2043]

okay so i took a search and didnt find too much except that you want to remove some of the rivits. my MHG didnt come with any instructions so if anybodys got some that would be great! its a titan 1.4.

now ive got some pics here and i was hoping somebody could tell me which rivits to cut out and how...

 

[lintlars]

put it on the block the rivets that hit the block should be removed

 

[IJ.]

The one at the front on the side!

Sit the gasket on the block and you'll see which one.

I use a pair of side cutters to squash one end then pop it out the other side.

 

[SLO-MK3]

I've got the TMS 2.0mm and all the rivets cleared the deck just fine so I did'nt remove any of 'em. I think this was discussed before and it was the old-school mhg's that need to have the rivets removed. Do as these guys^^^ have sugested, and lay it on the block and see if they all clear

G/L

 

[tookwik4u89]

Sounds like Cometic.

 

[SLO-MK3]

Sounds like Cometic.

I thought they were the same thing

 

[jdub]

Titan = Cometic

 

[MmmBoost]

i had a titn 2.0mm, and i removed all the rivets. there are only 3.