I have a mbc from dr jones how do you hook it up to an external wastegate. There is one vac line on the wastegate and there is a barb fitting missing where another one goes? I dont know if i need it because there is a vac line on the side of the wastegate. My turbo doesnt have the vac line like the ct-26. Thanks steven.
mbc help
- Thread starter suprapower1221
- Start date
It should go inline between the turbo outlet and the waistgate actuator, It does not make a difference what turbo or waistgate you use.
Here is a thread in his controller and how to install it.
http://www.supramania.com/forums/showthread.php?t=22293&highlight=mbc
If there is no nipple on the turbo outlet, then I would add one as close to the turbo as possible in the turbo outlet or the IC pipe.
Where does the other end of the vacuum line off the waistgate go to?
Here is a thread in his controller and how to install it.
http://www.supramania.com/forums/showthread.php?t=22293&highlight=mbc
If there is no nipple on the turbo outlet, then I would add one as close to the turbo as possible in the turbo outlet or the IC pipe.
Where does the other end of the vacuum line off the waistgate go to?