v4.65 - Vout1 and Vout2 via the 4.40 settings should be set to '0' - is this the same as Use Setpoint in 4.65?
Also, anyone tried 4.80 yet?
Also, anyone tried 4.80 yet?
MAFT-pro question
- Thread starter Doward
- Start date
Doward said:
yes.
Doward said:
4.80 is pretty much the same as 4.65, just added content for other cars, etc.
Alright, I'll update to 4.8 when I get back from work this afternoon, mount up the IAT + MAP, and see if she fires 
Gotta go through all the settings, though, as it's Mike's old setup - and Lord knows I'm not running what he is
Gotta go through all the settings, though, as it's Mike's old setup - and Lord knows I'm not running what he is Doward said:Alright, I'll update to 4.8 when I get back from work this afternoon, mount up the IAT + MAP, and see if she fires
just reset the MAFT pro- hold down right 2 buttons on power up....
Hm... ok, reset it, it idles for me - with codes 24,31,32.
I'm going to check that I'm getting a signal to the MAFT-Pro from the IAT. It reads the Map, but I need to verify what the 'Sensor Monitor' abbreviations are.
Not reading any RPM at the moment - going to look into that one
I'm going to check that I'm getting a signal to the MAFT-Pro from the IAT. It reads the Map, but I need to verify what the 'Sensor Monitor' abbreviations are.
Not reading any RPM at the moment - going to look into that one
IT LIVES! Ok, no exhaust, no IC, no nothing... fixed the rpm, it now reads it, and Fout is working.
Hellz yes. This is sweet.
Hellz yes. This is sweet.
Seems with no RPM reading, the MAFT-Pro didn't bother to output any sort of signal to the TCCS.
Fixed now
http://www.youtube.com/watch?v=6sQSU279BpM
Fixed now
http://www.youtube.com/watch?v=6sQSU279BpM
Doward said:Seems with no RPM reading, the MAFT-Pro didn't bother to output any sort of signal to the TCCS.
Fixed now
http://www.youtube.com/watch?v=6sQSU279BpM
yessir, w/o RPM input it can't calculate fueling...
I figured as such. I've got it running now, woo! I'm hoping to button her up tomorrow, and spend the weekend teaching the Supra some new tricks
Heh. Gonna play with getting the bin out of the MAFT-Pro now. Not finding any instructions on it, though, so.... hm. Ah, we'll see what happens.
Though I only have the 4.80 ads. Dangit - I haven't flashed it up yet, let me do that so I can actually connect!
Though I only have the 4.80 ads. Dangit - I haven't flashed it up yet, let me do that so I can actually connect!
Appreciate it!
Though it will have to wait until tomorrow. The wife has taken a moment to inform me that firing up my Supra any more tonight with no exhaust (and I mean nothing after the turbo) will not be in the best of interests for my health.
I'll give it a whirl in the morning
Though it will have to wait until tomorrow. The wife has taken a moment to inform me that firing up my Supra any more tonight with no exhaust (and I mean nothing after the turbo) will not be in the best of interests for my health.
I'll give it a whirl in the morning
Doward said:Appreciate it!
Though it will have to wait until tomorrow. The wife has taken a moment to inform me that firing up my Supra any more tonight with no exhaust (and I mean nothing after the turbo) will not be in the best of interests for my health.
I'll give it a whirl in the morning
yeah, @ 10pm it's prob not the best idea in most residential areas....
Yeah, I know... but dammit I hate to get rolling on a project, and have to stop. One thing I miss about living in rural areas is the ability to be up late working on the cars! (ha, wish I could have recorded firing up my 400 Poncho on the engine stand @ 2am )
)