Lower Hardpipe

[cass10169]

I am going to make my own lower hard pipe but I need to find out the size of the old one. Being how mine is destoryed I figured I would see if anyone else knows the size of the two lower pipes and the exact angle of the metal pipe. Thanks
Michael

 

[GrimJack]

2" pipe if I recall correctly. Have to wait for someone else to chime in with the angles...

 

[NDBoost]

there are other bends within each rubber pipe. Its best to find another lower IC piping and fab from that, instead of doing it "roughly"

 

[cass10169]

yea thats why I was hoping someone else would have already gotten everything off of it to make there own. If not I will just go that way but hoping this may be quicker.

 

[souprat]

i havent done it yet but i was just going to use two 45degree 2.25in pipes.

http://www.supra-tech.com/Tech/Intercooler pipes.htme

 

[jmcboost]

i havent done it yet but i was just going to use two 45degree 2.25in pipes.

http://www.supra-tech.com/Tech/Intercooler pipes.htme

Thats what I used and they came out great.