I'm thinking I made a mistake. I ordered a set of top feed fic 850cc low impedance injectors. I ordered them for a 7mgte as my rail is 11mm 7m type. Will these work on a non vvti aristo 2jzgte motor with stock ecu? Sorry for the repeat question but the answers I have searched for were a bit confusing. Thanks for the help.
Low Impedance Injectors on 2JZ
- Thread starter nightsun
- Start date
The aristo uses 440 high imp injectors.
So if your running a aristo Ecu you will need a resistor pack from a us mk4 or a mk3.
If they were high imp(resistance) or if you were running a us Ecu you would be fine.
Also (idk the value) but you could just put a small resistor inline in the wire it will do the same thing as a resistor pack.
So if your running a aristo Ecu you will need a resistor pack from a us mk4 or a mk3.
If they were high imp(resistance) or if you were running a us Ecu you would be fine.
Also (idk the value) but you could just put a small resistor inline in the wire it will do the same thing as a resistor pack.
I've asked them to ship high impedance instead of the low as that would be the easiest fix. Thanks for the help. Learning as I go...got in too much of a rush today trying to cross items off the swap list.