Kyles 88 supra build

Stepchild21

New Member
May 17, 2014
33
0
0
Beaumont Alberta Canada
Hey guys newer to this forum here, lurked for quite some time, got lots of wicked info on this site and thought I might aswell make my own thread with some pics from the past/ info, and keep updating as I go.

So I bought the car about a year and a half ago. 88 red ma70 targa top LHD, 5 speed manual.
e65d197082ed399a013933254caed4e6.jpg


Came like this. Had a 7mgte with about 300,000km, BHG (surprise surprise), mint interior, body was about 7/10. Bought it with intentions of fixing up the headgasket and leaving as is, but that seemed awfully boring for a project car.

So out came the 7m about a week after owning it.

600af7ce0516bc3f536532353ed28885.jpg


Decided to start working on the body of the car while I searched out a suitable motor to swap it with.

Discovered a shit ton of rust on the rear fenders. Tried fixing It up and wasn't so pleased with the outcome, so went with plan B. Cut them out and install some Carbon fiber flares.
7d1d62e1030acc8d896d6014c1a8564b.jpg


Also decided to go with the 89+ spoiler + tailights, and kept the 88 front bumper. Always been more to my liking.

For suspension at the moment I'm running jic Magic coilovers, and A1 control arms for the rear.

043d7815143033dffc09f0eabbdea041.jpg

Seeing how I don't have any connections for paint, I decided on going with a vinyl wrap. Buddy of mine installs it professionally so had him do my car.

Here's the outcome
2dc554f798df353e54ef750a157f8117.jpg


Body work was coming along well, ordered in some 89+ mouldings from Dubai.

Then grabbed myself a 1jz, tore it down, cleaned everything up, head sent off to be checked out, new rings, bearings & gaskets throughout.
a82e03a30cb51e5950c91f8488f71f37.jpg


Pieces her all together and now she looks something like this
49c95eee08bab90c5a328cd0b32c5cae.jpg
69243daf360e528a6087470cbee3d76f.jpg
578a79b4c5c9577f22981d7c48063fed.jpg


So yeah that's my intro, I'll try to keep her updated and maybe actually get this car to move this year.

Cheers !
 

akito

Keep Laughing.You're Next
Jul 31, 2006
1,568
0
0
Springfield/Va
Holy shit, vinyl wrap looks dope as fuck! If you hadn't said anything, i'd thought you had the car repainted. Clean car dude!
 

Stepchild21

New Member
May 17, 2014
33
0
0
Beaumont Alberta Canada
Hey guys. Going single turbo soon. Will be using the stock Ecu for now, can't afford full stand alone yet. The plan is to install a fuel pressure regulator and a wide band sensor to monitor AFR. Wastegate spring is set to 12-13lbs, stock ecu & injectors on the 1jz. Not looking for any extreme power or anything at the moment, but would there be anything else you would recommend to install.

Thanks for any feedback guys
 

stevies3

New Member
Sep 24, 2014
24
0
0
www.facebook.com
Pretty much what im doing with the 7m im getting, on the 1jz it should be the same just more power im doing rc 550s,walbro 255,aeromotivefpr, and a uego aem wideband for now while i save for a precesion 6262 and a t4 mani lol
 

Stepchild21

New Member
May 17, 2014
33
0
0
Beaumont Alberta Canada
Perfect sounds like we're gonna have close to the same setup haha I've got a precision 6266 waiting to go on. Should probably look into upgrading the injectors like you aswell though. Haha
 

stevies3

New Member
Sep 24, 2014
24
0
0
www.facebook.com
Yea i mean i dont have to upgrade the injectors but its better to just do it at once that way i can only concentrate on the 6262 and a good ecu, im thinking the aem v1 should do the job lol i hope