Intercooler dimensions

[eman2289]

Im looking for advise on which intercooler sizing i should go with. The car is an 88 turbo with a 2JZ. Im looking for one that will fit nicely under the bumper. A chineese one is fine. Can anyone provide me with some dimensions?

 

[annoyingrob]

you can fit anything up to a 12x24x4" in there without removing anything.

9x24x3" is a good size I've found.

I run a 12x24x4, but it hangs low because I have some HUGE end tanks on it.

 

[arod]

Check this one

http://cgi.ebay.com/ebaymotors/CXRA...004QQitemZ140208392454QQrdZ1QQsspagenameZWDVW

 

[Rennat]

Whats the point of that one?
This one would make for a much easier install on a stock setup, unless you have FFIM.

http://cgi.ebay.com/ebaymotors/Buic...209439830QQcmdZViewItem?hash=item140209439830

 

[eman2289]

^ Its 2JZ so FFIM.

 

[Rennat]

Well then yea, i would go for the biggest one i could get. i saw one that was a 3.5'' from that same seller... but what are you end goals?

 

[Rennat]

Heres a 3'' core

http://cgi.ebay.com/ebaymotors/CXRa...216886677QQcmdZViewItem?hash=item250216886677

heres a 4'' core

http://cgi.ebay.com/ebaymotors/CXRa...62QQcategoryZ33742QQihZ015QQitemZ250217301617



Either way you win!