Installing A Boost Controller

[suprastanger507mgte]

Hi guys,

I just bought a AVCR Boost controller and was wondering how you guys went about hooking up the lines to the rear turbo.

I can see the lines for the front turbo and can get to it pretty easily, but the rear ones seems like there is not enough room.

I do know how to hookup the controller, but to get to the rear turbo seems like a challenge.

Any help/pointers, or secrets that can be revealed about this will be appreciated.

Thanks,
Moe.

 

[eps]

I'm in the same position as him. I've had my boost controller wired up for a month now, but I've been too lazy to try and get to the rear turbo for the vacume lines.

 

[itr206]

easiest way is to drop the DP and get to the rear turbo from under the car. It really isnt too bad then.

 

[OneJoeZee]

jose did his easier from the top with needle nose pliars he told me. but i couldnt figure out how. i went from the bottom, dp off too.

i think jose david blaine'd his lines on the rear turbo

 

[Trust_GTE]

jose did his easier from the top with needle nose pliars he told me. but i couldnt figure out how.

thats how I did mine, just use the longer needle nose pliers. Its a little tricky but do-able:2ar15:

 

[twinturbored90]

Yah Jose did mine too. He used really long niddle nose...that had a 45 deg bend on it. There is this one spot behind the head...where it gives just enough space to twist. now putting a clamp or cable tie is another story.

 

[7M-GTE]

does anyone have pics of their install I'm about to be installing a butt load of parts and the avcr just happens to be one of them... so I figured that while I'm doing all of these other parts I should do the boost controller... it would be greatly appreciated... or even pics of it already installed would be great... I already know where I want to put the display I just don't know where I want/need to place everything under the hood...