inector question

[supramike7m]

hey guys i think its been asked before, but i couldnt find it. anyway, im putting on my injectors and was wondering if it matters what injector on my clip goes on what injecor on my harness, as far as i know it does not matter. if anyone knows for sure let me know. thanks alot

Mike

 

[Suprawannabe]

No It doesn't matter if you were to take out injector #6 and switched it with injector #4. Just make sure the injector plug goes to its designated cylinder.

 

[supramike7m]

no i was wondering when i solder them in will it matter if i mix the wires up? two wires on the clip, to the two on the harness.

 

[pimptrizkit]

test resistence across the injector wq/ dvm if different or infiniti one way, then it matters.

 

[Nick M]

It shouldn't matter, but I would defer my answer to an electrical engineer.

 

[bluepearl]

It does'nt matter

 

[MKIIINA]

just make sure you do them all the same and your fine

 

[drjonez]

just make sure you do them all the same and your fine

bingo.

 

[supramike7m]

ok, so our injector have 3 sets right? so as long as i get the two in each set wired the same im good