I have a 7" Alpine double DIN in mine. Bolts right into the stock bracket. Pull off the shift knob, and bezel around the shifter and climate control. You will see 4 screws. Undo them and pull the bracket out and you will see what I mean.
Easiest deck install you can do in my opinion
Easiest deck install you can do in my opinion
did u have to buy anything else for everything to work?
u just used the stereo harness that it came with?
u just used the stereo harness that it came with?
u can buy a harness from a car audio store specific for the car.. so then you just solder the wires together and shrink tube... then it plugs in to the deck, and the other end plugs into the car harness..
a little difficult to explain if you havnt seen it before, but its the proper way to do it, and very clean.
a little difficult to explain if you havnt seen it before, but its the proper way to do it, and very clean.
this is what were talking about, the one on the left with the bullet connectors. the one on the right is the plug and harness from the new deck, join wires, then it will just plug into the stock supra wiring (assuming your plug hasnt been cut off already for a aftermarket deck.)
.JPG)