Im currently working on my 1jz swap however i ran across a kink in my wiring. The pinouts that i have differ from the wires in my actual connector. the three big slots in the middle: the top one is empty, the second one is black/blue and the third is all black. according to my diags the top one should be black/blue, 2nd is black/white and the 3rd is black/orange. any thoughts?
IH1 connector not matching to pinouts
- Thread starter ma70mkiii
- Start date
Yea the automatic supras split the EFI circuit with the NSW park selector switch in the trany so you have to splice 3 wires together there when going from an automatic MA70 to a manual 1JZ.