Identify connector in harness...

achilles100

New Member
Jun 23, 2010
8
0
0
Mesa, AZ
Folks, I am trying to identify a connector that is not plugged into anything. Maybe you can help? It is on the exhaust side. It's with the harness that comes across the front and top of the engine. One leg goes to the oil pressure sending unit. The other leg is about 12" long and ends in a round two-wire grey connector that was hanging down near the lower radiator hose, but is not plugged into anything. I'm at work, but I can get a picture later tonight. Any ideas? I didn't find anything to plug it into while I was taking the turbo out of the car.

Thanks in advance!

Aaron
91T

---------- Post added at 12:03 PM ---------- Previous post was at 12:02 PM ----------

I'm sorry, I meant to post this in the 7M-GTE discussion board. Would a mod kindly move this?
 

GrimJack

Administrator
Dec 31, 1969
12,377
3
38
56
Richmond, BC, Canada
idriders.com
No, PPS is on the intake side, on the steering rack.

Does this help?
Thermo%20Switches.jpg
 

achilles100

New Member
Jun 23, 2010
8
0
0
Mesa, AZ
Very cool! Thanks everyone. The connector I am referring to is the #10 in the first picture on the wiring harness walkthrough thread. Sounds like it is another miscellaneous connector for another market or something. I'll tie it up somewhere and forget about it.

I appreciate the help!

Aaron