question i have been looking for a handbrake for drifting and im just wondering does any1 have a pic of it installed on their mk3 so i kno where to install it
hydraulic hand brake?
- Thread starter my7mgte527
- Start date
Remove center console and mount it behind the shifter hole. Wilwood is what we've used in race cars, you run all rear brake through it so you need to make new rear brake lines.
Sent from my X10i using Tapatalk
Sent from my X10i using Tapatalk
Are you gonna add a second set of rear calipers? Why can't u just use the original cable e brake?
The ebrake on the Supra is *VERY* small. Using it for drifting means you would likely have to replace the pads at least once per event.
Just be aware that the shoes for the original park break won't stand up to that kind of abuse for long at all. Standard new thickness is 2.5mm.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=BR&P=41
It was more meant to hold the car in place parked on a hill, not lock up the wheels on the track
Edit: Bah! Grim beat me to it :icon_razz
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=BR&P=41
It was more meant to hold the car in place parked on a hill, not lock up the wheels on the track
Edit: Bah! Grim beat me to it :icon_razz
from what my friends have done they made a custom line that went into the hydrolic lines and that worked pretty good but i would like to c how the drift brake loks on the inside of the car so i have an idea where to mount it