diagram in the TSRM that shows all the specifics of the fuel pump resistor and relay. wire colors and what they do... I can't find it.
Help me find the
- Thread starter Justin
- Start date
Botton right hand corner: http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?Section=D&Page=4
Thanks man, that's not the one I'm after... It was in color, and said the destination of the wire right on it... and it had the plugs next to it...
if I find it I'll post it
if I find it I'll post it
this isn't it either.
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/Main/Main_054.gif
they're both helpfull, but the one I'm after is much more so....
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/Main/Main_054.gif
they're both helpfull, but the one I'm after is much more so....
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/FI/FI_114.gif
So what you really wanna do is jumper B+ and FP together to do the 12volt mod. Then you can get rid of the relay, and resistor and clean stuff up a bit. Woohoo.
So what you really wanna do is jumper B+ and FP together to do the 12volt mod. Then you can get rid of the relay, and resistor and clean stuff up a bit. Woohoo.