Guaging interest....Poly motor mounts

[becauseican]

Just wondering how many of you would be seriously interested in 89+ semi solid Poly motor mounts ?, as i hope to start on them soon if there is demand for them. As we now have full solids available and we got quite a few requests for semi solid/ poly mounts. Also we are working on poly trans mounts, as i have the prototype on my car and its working great, we just need to finalize the details. Of course they will be bolt on parts, the trans mount will requier drilling two holes in you trans crossmember.

Now that we have finished the square type pre 89 poly mounts its time to move onto the next product. They are now available, check the BIC vendor section for details. BIC is striving to be your one stop shop for anything motor mount, 1jz bracket, trans mount related.

Randy@BIC

 

[Mr. Sinister]

If it doesn't increase NVH too much, I'd be down for a set. Assuming they're not insanely expensive, of course.

 

[BlindRonin]

Would the tranny mounts be for all years or just 89+?

 

[becauseican]

Would the tranny mounts be for all years or just 89+?

The trans mounts are all the same and will work for all years.

 

[suprakid24]

hmm, I was just looking to see the other day if there was anything out other than solid motor mounts... these would be cool. could use the tranny mounts too.

 

[BlindRonin]

well i would be most interested in a tranny mount.

 

[rumptis]

I just pulled my engine for the 2nd time, both times I had a broken mount and have seen many others have broken ones.

I'm very interested in a good mount.

I will need a set in then next 2 months probably.

 

[tsuper92]

randy any pic's of the trans mount.i checked your web site but couldn't find it.

 

[becauseican]

I will have pics of the prototype posted soon.

 

[OfnaRcR4]

Yeah, as long as the price is right i'll probally order some.

 

[CTsupra]

interested!

 

[got_boosted]

Pencil me in with the interested crowd. I recently went to solid mounts. The vibration really isn't very noticable, but I would prefer something that transmitted less engine noise to the cabin.

Collin

 

[thelonerider]

Randy, i would be interested too... I still have the original 89+ mounts and am sure they are just crying to break some time soon. Hopefully they wont be priced too high.
Edmund